Месечне архиве: Фебруар 2014

Како навести људе као Сеарцх Сцопе / Садржај Извор Коришћење СхареПоинт 2013 РЕСТ АПИ

I had reason to work with the SharePoint 2013 Search API via REST for the first time. I wanted to search for people, not documents. The key learning here is that you specify content sources via its GUID (or at least in this case). The following jQuery snippet shows how:

    loadExpertsAsync: функција() {

        jQuery.support.cors = прави;

        $.ajax({
            УРЛ: ово.CreateFullApiUrl() +
                "?querytext='portals'&sourceid='b09a7990-05ea-4af9-81ef-edfab16c4e31'" +
                "&selectproperties='LinkedInProfileUrl,GoogleCirclesProfileUrl,BALargeProfilePictureUrls,BAGridPictures,WorkEmail,Skills,AboutMe,Interests,JobTitle,PastProjects,PictureURL,PreferredName,TwitterHandle,LinkedInProfileUrl,PreferredName,GoogleCirclesProfileUrl'" +
                "&rowlimit=99",
            метод: "GET",
            headers: { "Accept": "application/json; odata=verbose" },
            cache: лажан,
            success: функција (резултат) {

У мом случају, I’m running the API against SharePoint online. To get the GUID, I followed these steps:

  1. Access the SharePoint admin center
  2. Select “search” from the left hand navigation
  3. Select “Manage Result Sources”
  4. Select “Local People Results”
  5. Look at the URL.

My URL looked something like:

https://xyzzy-admin.sharepoint.com/_layouts/15/searchadmin/EditResultSource.aspx?level=tenant&sourceid=b09a7990%2D05ea%2D4af9%2D81ef%2Dedfab16c4e31&view=1

The sourceid parameter is what worked for me.

(I understand that the sourceid may actually be a sort of permanent thing with SP, but I’ll always check anyway 🙂 ).

</крај>

undefinedПретплатите се на мој блог.

Следите ме на Туиттер на http://www.twitter.com/pagalvin

Пример СхареПоинт РЕСТ Позиви

Here’s a set of sample REST calls that work for me and may help you out as well. Од 02/2014, there are two examples 🙂

  1. Reference a Column With Spaces In Its Name
  2. Reference a Multi-Select Column
  3. Perform a People Search via REST

 

I’ll add to this as time passes.

Here are some useful inks I’ve found as well:

Reference a Column With Spaces In Its Name

I create a custom list with a column named “Blog Author” (space between Blog and Author).

The $select to reference that column is:

image

Simply replace the space with “_x0020_”. We see the _x0020_ in many examples across the internets and REST is no different.

If you don’t do that, you’re liable to get an error message like this:

The expression “Blog Author” is not valid.

Easy enough.

Reference a Multi-Select Lookup Column

Set up:

  1. Create a custom list named Categories.
  2. Add some categories. I added categories thusly:image
  3. Create another custom list called MockBlog and add Categories as a multi-select list column (or site column if that’s how you roll).

Add some items to your Mockblog list and you’re ready.

An Ajax style call using jQuery will look something like this:

serverUrl  = "/_api/web/lists/GetByTitle('MockBlog')/ставке" +
             "?$select=Title,Categories/Title,Blog_x0020_Author/Title" + 
             "&$expand=Blog_x0020_Author,Categories";

We’re telling SharePoint “Give me the title for all the Categories (Categories/Title). Get the actual values for Наслов по $expanding the Categories list.” (My RESTful paraphrasing is probably pretty loose, but this how I’m interpreting it).

If you’re doing this via JavaScript and using Fiddler to look at the output, you get something like this in return:

 

image

(The above is a JSON object)

Perform a People Search via REST

I blogged about this separately. The key is to specify a sourceid parameter whose value is the GUID of the Local People content source. (Content sources used to be called scopes and it’s my-oh-my so hard not to call everything a scope for me!).

Прочитајте више о томе овде: http://www.mstechblogs.com/paul/?p=10385

 

</крај>

undefinedПретплатите се на мој блог.

Следите ме на Туиттер на http://www.twitter.com/pagalvin

Брзо и лако: Креирање СхареПоинт сајт помоћу ОДМОРИЛИ

There are a lot of resources around that show how to do this, but I couldn’t find a comprehensive go-to link, so here we are.

You can create a SharePoint site using the REST API.  Here’s a fully baked example:

<!--
    SiteRequestForm.html: Collect information and create a site for the user.
-->

<центар>
<табела>
    <тр>
        <тд>Site Name:</тд>
        <тд><улазни тип="text" име="SiteName" ид="SiteName" /></тд>
    </тр>
    <тр>
        <тд colspan="2">
            <улазни тип="submit" ид="CreateSiteButton" вредност="Create the Site" />
        </тд>
    </тр>
</табела>
</центар>

<скрипта срц="../Plugins/jquery-1.11.0.min.js"></скрипта>

<скрипта>
var CreateSiteLogicContainer = {

    createSiteData: {
            "parameters": {
                __metadata: { "type": "SP.WebInfoCreationInformation" },
                Сајт: "Paultest1",
                Наслов: "Paultest1",
                Опис: "rest-created web by Paul!",
                Language: 1033,
                WebTemplate: "sts",
                UseUniquePermissions: лажан
            }
    },

    createSite: функција () {

        jQuery.support.cors = прави;

        CreateSiteLogicContainer.createSiteData.parameters.Url = $("#SiteName").val();
        
        $.ajax({
            УРЛ: "https://bigapplesharepoint.sharepoint.com/NBAIADev/_api/web/webinfos/add",
            метод: "POST",

            headers: {
                "Accept": "application/json; odata=verbose",
                "content-type": "application/json;odata=verbose",
                "X-RequestDigest": $("#__REQUESTDIGEST").val()
            },

            подаци: JSON.stringify(CreateSiteLogicContainer.createSiteData),

            success: функција () { alert("success"); },
            грешка: функција () { alert("error"); }

        });
    },

    wireUpForm: функција () {
        $("#CreateSiteButton").клик(функција () {
            alert("About to try and create the site.");
            CreateSiteLogicContainer.createSite();
        });
    }


}

CreateSiteLogicContainer.wireUpForm();

</скрипта>

When successful, you get a JSON packet in response like this:

image

My key thoughts and learnings from this include:

  • This approach uses jQuery.  У мом случају, my jQuery library is located in “../plugins.”  You’ll want to change that to point to your favorite JQ location.
  • You can copy and paste that whole snippet into a Content Editor Web Part on a page and it should work just fine.  You’ll want to change the end point of the API call and make sure you reference JQ correctly.
  • The URL is relative to your API’s endpoint.  У мом случају, it’s creating sub-sites underneath https://bigapplesharepoint.com
  • You don’t need to provide a content-length. Some blog posts and MSDN document implies that you do, but happened for me automatically, which I assume is being handled by the $.ajax call itself.
  • This line is required in order to avoid a “forbidden” response: "X-RequestDigest": $("#__REQUESTDIGEST").val().  There are other ways to do it, but this is pretty nice.  I have lost the link to blog that provided this shortcut.  H/T to you, mysterious blogger!

Good luck and hope this helps someone out.

</крај>

undefinedПретплатите се на мој блог.

Следите ме на Туиттер на http://www.twitter.com/pagalvin

Превазиђите досадне проблем релативне УРЛ адресе у СхареПоинт Брзо покретање

I wanted to add a link to the quick launch navigation the other day and SharePoint told me:

image

Pure text version of that is:

Ensure that the URL is valid and begins with either a valid character (a number sign (#) or forward slash (/)) or a valid supported protocol (на пример, ‘http://’, ‘https://’, ‘file://’, ‘ftp://’, ‘mailto:’, ‘news:’).

“Blech and pox!” I said.

A workaround to this is to use JavaScript to find a known link in the quick launch and override its behavior.

To test this, add a new link to your test site thusly:

image

I used jQuery. To solve it, get some JavaScript and jQuery onto the page using your favorite technique and with a line of code like this:

 

$(документ).спреман( функција () {

    $("a:contains('Test URL replacement')").клик(функција () { alert("changed click behavior!"); повратак лажан;});

});

And Bob’s your uncle.

The jQuery selector finds every <a> tag that has “Test URL replacement” in its name. You may want to find-tune that depending on your link and such.

The .click(функција() overrides whatever SharePoint would have done when the user clicked. Make sure you “return false” or else it will do your stuff and then try to the href thing too, which is almost certainly not your goal.

This was done and test in a SharePoint online environment but should work well in 2010 and earlier too.

</крај>

undefinedПретплатите се на мој блог.

Следите ме на Туиттер на http://www.twitter.com/pagalvin

Брза и једноставна: СхареПоинт ОДМОР позива само даје 100 Записи

I’ve been working on a public facing web site for my SharePoint practice here in New York and it uses a lot of JavaScript and REST calls to show content.

During mainline development, I create a small dataset with just 10 or so rows in a custom list and my REST calls all pulled from there.  Once I bumped up the list to have a few hundred rows of data to test for anticipated growth, I found that I was getting exactly 100 rows returned back on my REST calls.

This is a very simple thing to address.  У мом случају (and I believe in most cases), the default REST calls to SharePoint (and possibly as an industry standard?) повратак 100 rows.  To return more than the default, use the $top parameter on your call, као у:

GET /Insights Dev/_api/web/lists/GetByTitle(‘MockBlog’)/ставке?$select=ID,Наслов,Categories/Title,Blog_x0020_Author/Title,DatePublished,BlogSummary&$expand=Blog_x0020_Author,Categories&$filter=&$top=9999

I picked 9999 in this case since I know that growth-wise, there won’t be more than 200 or so rows added to this list in a year.  If it becomes ungainly, we can implement some paging down the road.

</крај>

undefinedПретплатите се на мој блог.

Следите ме на Туиттер на http://www.twitter.com/pagalvin

Брза и једноставна: Решите "Инвалид УРЛ параметар” Проблем са УпдатеЛистИтемс у листс.асмк

When working with UpdateListItems via lists.asmx, it’s easy to generate the error:

Invalid URL Parameter.

The URL provided contains an invalid Command or Value. Please check the URL again.

You can get this error when you forget to include ID in the the list of fields to update.  Ово, like a lot of these SP web services, is a bit counterintuitive since you need to include the ID in the ID attribute of the <Method> element.  And you’re not updated ID and probably never want to in the first place.

This SOAP envelope works:

<соапенв:Коверте КСМЛнс:соапенв ='http://schemas.xmlsoap.org/soap/envelope/'>
  <соапенв:Тело>                      
    <UpdateListItems xmlns='http://schemas.microsoft.com/sharepoint/soap/'>                     
      <листнаме>{C712E2EA-54E1-47AD-9D99-1848C7773E2F}</листнаме>                     
        <updates>                     
         <Batch OnError="Continue">
          <Method ID="1" Cmd="Update">
            <Field Name="CooperativeLock">locked!</Field>
            <Field Name="ID">1</Field>
          </Method>
        </Batch>                     
        </updates>                
      </UpdateListItems>             
  </соапенв:Тело>         
</соапенв:Коверат>

If you strip out the ID field reference then you’ll get the annoying “Invalid URL parameter” message.

</крај>

undefinedПретплатите се на мој блог.

Следите ме на Туиттер на http://www.twitter.com/pagalvin