أرشيف

كيفية إرسال رسالة بالبريد الالكتروني من WebPart في موس 2007

مرحبا المشروعات الإنمائية,
التالية هي قطعة من رمز لإرسال البريد الإلكتروني من webpart.

باستخدام نظام;
باستخدام System.Collections.Generic;
باستخدام System.ComponentModel;
استخدام System.Text;
باستخدام System.Web;
باستخدام System.Web.UI;
باستخدام System.Web.UI.WebControls;
باستخدام System.Collections.ObjectModel;
باستخدام Microsoft.SharePoint.Utilities;
باستخدام Microsoft.SharePoint;
باستخدام System.Data;
باستخدام System.Collections;
مساحة تنسخ
{
الطبقة العامة تنسخ : Microsoft.SharePoint.WebPartPages.WebPart
{
خاصة مربع نص txtTo;
خاصة زر btnSendMail;
محمية CreateChildControls تجاوز الفراغ()
{
txtTo = مربع نص جديد();
this.Controls.Add(txtTo);
btnSendMail = زر جديد();
btnSendMail.Text = “إرسال البريد الإلكتروني”;
btnSendMail.Click = EventHandler جديدة(SendMail_Click);
this.Controls.Add(btnSendMail);
}
الفراغ SendMail_Click(يرسل الكائن, EventArgs ه)
{
SPSite _SITE = SPSite جديد(HttpContext.Current.Request.Url.ToString());
SPWeb _site.OpenWeb _web =();
_web.AllowUnsafeUpdates = صحيح;
SPUtility.SendEmail(_web, زائف, زائف, txtTo.Text, “اختبار البريد الالكتروني”, “نص نص الرسالة”);
_web.Dispose();
_site.Dispose();
}
}
}

إنشاء WebPart وسجل أنها SafeControl

موس 2007 التسعير & تكلف معلومات

عززت أنا صلات قليلة من Microsoft لMOSS 2007 المنتج التكاليف.

خادم مايكروسوفت أوفيس شير 2007 والتسعير التكنولوجيات ذات الصلة

خادم مايكروسوفت أوفيس شير 2007 المنتجات مقارنة تحميل

2007 مايكروسوفت نظام التسعير، ومكتب معلومات الترقية

كيفية إخفاء شريط التشغيل السريع في MOSS 2007

هل تريد اخفاء شريط التشغيل السريع في MOSS 2007
هناك طريقتان لإخفاء شريط التشغيل السريع
1. يمكنك تحرير مباشرة في CSS
2. مضيفا مخفي محتوى WebPart تعليمات رئيس التحرير

Add new content editor webpart
Click Source Editor in ToolPane
paste the below code in content editor webpart
[أسلوب]
.MS-يسهل لك
{
display:none;
}
.ms-navframe
{
display: none;
}
[/أسلوب]
Use “<" & ">” instead of “[” & “]”
Set the Hidden Property to True under layout section in ToolPane.
Now Refresh the Page……You Quick Launch Bar is Gone 🙂

مقدمة في ورشة صياغة مستقبل

I presented the Demo on Architecting distributed applications using Grid Architecture in Accenture Shaping the Future workshop. هذا هو العرض الثاني في لاكسنتشر تشكيل مستقبل.

كيفية فرض MOSS 2007 وظائف توقيت لتنفيذ

استخدام الأمر stadm التالية لفرض وظائف فرص عمل مؤقت لتنفيذ.
لا حاجة الى الانتظار للفاصل الزمني لتنفيذ timerjobs.
stsadm.exe و-o execadmsvcjobs

موس 2007 إعادة تسمية الويب اسم التطبيق

أريد أن أشارك كيفية إعادة تسمية اسم التطبيق على شبكة الإنترنت في إدارة سطر الأوامر من MOSS 2007 باستخدام STSADM القيادة.

بناء الجملة:
STSADM -o Renameweb -url -newname

المثال:
STSADM -o Renameweb -url HTTP://مضيف محلي / oldname -newname newname

سوف الأمر أعلاه إعادة تسمية تطبيق ويب من oldname إلى newname.

خادم التجارة 2007 التكامل مع MOSS 2007

MOSS ديها العديد من الميزات يحمل في ثناياه عوامل. نطاق هذا POC هو دمج التجارة Server 2007 مع MOSS 2007 لتوفير البوابة التطبيق المتكامل التجارة الإلكترونية

تكوين MOSS 2007 لاستخدام موفر العضوية التجارة Server كأساس لمصادقة المستخدم

The primary tasks are to make the Central Administration and Portal sites hand-shake with Commerce Server. This needs to be done by modifying the appropriate Web.config files for these sites. By adding the Commerce Server and httpModules sections, the SharePoint Central Administration site and the Portal site will be able to create the necessary CommerceContext object. The CommerceContext object enables the Commerce Server Membership Provider to be initialized correctly, and also enables Web parts and pages in the portal to use the CommerceContext object to access Commerce Server resources such as the Product Catalog.
The UpmMembership Provider extends the Membership framework offered by ASP.Net to accommodate the use of the ASP.Net Login Controls and authenticate against Commerce Server Profiles.

Update the Web.config for MOSS Central Administration and in Portal site with below sections to avail Commerce Server data and services in MOSS

  • Commerce Server Section Group
  • Commerce Server Group
  • Http Modules
  • Assemblies
  • Membership Provider
  • Profile Section

o Determine which Web.config file is used for the SharePoint Central Administration site and which is used for the Portal site. Use the Home Directory tab in IIS Manager to determine the appropriate path of the Web.config file for each site.

o Use the Web.config file that was previously created for the Commerce Server C SharpSite as the source for the text to copy in the following instructions:

Please follow the below steps to modify the web.config file of SharePoint administration site.

Step 1: Adding Commerce Server Section Group
Copy the Commerce [sectionGroup] في [configSections] and paste it after the [System.Workflow.ComponentModel.WorkflowCompiler] section group.
[sectionGroup name=”CommerceServer”]
[section name=”application” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceApplicationSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”authentication” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceAuthenticationSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”pipelines” type=”Microsoft.CommerceServer.Runtime.Configuration.CommercePipelineSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”caches” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceCacheSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”messageManager” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceMessageManagerSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”catalog” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceCatalogSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”orders” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceOrdersSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”profiles” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceProfilesSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”contentSelection” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceContentSelectionSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”commerceEvent” type=”Microsoft.CommerceServer.Runtime.Configuration.EventLoggerConfigurationHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[section name=”expressions” type=”Microsoft.CommerceServer.Runtime.Configuration.CommerceExpressionSectionHandler, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[/sectionGroup]
Step 2: Adding Commerce Server Group
§ Copy the [CommerceServer] section and paste it after the [شير] section, just before the [system.web] section.

[CommerceServer]
[application siteName=”CDevSite” debugLevel=”Production”/]
[pipelines][/pipelines]
[expressions schema=”Auto”/]
[caches]
[cache name=”الإعلان” type=”الإعلان” refreshInterval=”900″ retryInterval=”30″/]
[cache name=”Discounts” type=”Discounts” refreshInterval=”0″ retryInterval=”30″/]
[cache name=”ShippingManagerCache” type=”Shipping” loaderProgId=”Commerce.ShippingMethodCache” refreshInterval=”0″ retryInterval=”30″/]
[cache name=”PaymentMethodCache” type=”Payment”/]
[cache name=”OrdersConfigurationCache” type=”OrdersConfiguration”/]
[/caches]
[messageManager]
[cultures default=”en-US” baseName=”CommerceMessageManager” assembly=”CommerceMessageManager”]
[culture id=”en-US”/]
[culture id=”fr-fr”/]
[culture id=”ja-JP”/]
[culture id=”de-DE”/]
[/cultures]
[resources]
[resource id=”pur_badsku”/]
[resource id=”pur_badplacedprice”/]
[resource id=”pur_discount_changed”/]
[resource id=”pur_discount_removed”/]
[resource id=”pur_noitems”/]
[resource id=”pur_badshipping”/]
[resource id=”pur_badhandling”/]
[resource id=”pur_badtax”/]
[resource id=”pur_badcc”/]
[resource id=”pur_badpayment”/]
[resource id=”pur_badverify”/]
[resource id=”pur_out_of_stock”/]
[resource id=”unknown_shipping_method”/]
[/resources]
[/messageManager]
[orders honorStatus=”صحيح” newOrderStatus=”NewOrder” sqlCommandTimeoutSeconds=”60″ sqlLongRunningCommandTimeoutSeconds=”28800″]
[addressMap]
[profileDefinition name=”عنوان”/]
[property from=”GeneralInfo.address_id” to=”OrderAddressId”/]
[property from=”GeneralInfo.first_name” to=”الاسم الأول”/]
[property from=”GeneralInfo.last_name” to=”اسم العائلة”/]
[property from=”GeneralInfo.address_line1″ to=”Line1″/]
[property from=”GeneralInfo.address_line2″ to=”Line2″/]
[property from=”GeneralInfo.city” to=”City”/]
[property from=”GeneralInfo.region_code” to=”RegionCode”/]
[property from=”GeneralInfo.postal_code” to=”PostalCode”/]
[property from=”GeneralInfo.country_name” to=”CountryName”/]
[property from=”GeneralInfo.region_name” to=”State”/]
[property from=”GeneralInfo.tel_number” to=”DaytimePhoneNumber”/]
[/addressMap]
[Types]
[Type Key=”Basket” UserTypeName=”Basket” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”PurchaseOrder” UserTypeName=”PurchaseOrder” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”OrderTemplate” UserTypeName=”OrderTemplate” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”OrderForm” UserTypeName=”OrderForm” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”LineItem” UserTypeName=”LineItem” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”Shipment” UserTypeName=”Shipment” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”Payment” UserTypeName=”Payment” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”CreditCardPayment” UserTypeName=”CreditCardPayment” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”GiftCertificatePayment” UserTypeName=”GiftCertificatePayment” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”PurchaseOrderPayment” UserTypeName=”PurchaseOrderPayment” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”CashCardPayment” UserTypeName=”CashCardPayment” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”OrderAddress” UserTypeName=”OrderAddress” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”DiscountApplicationRecord” UserTypeName=”DiscountApplicationRecord” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”ShippingDiscountRecord” UserTypeName=”ShippingDiscountRecord” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[Type Key=”PromoCodeRecord” UserTypeName=”PromoCodeRecord” AssemblyType=”GAC” NameSpace=”Microsoft.CommerceServer.Runtime.Orders” Assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[/Types]
[Limits OrderFormsPerOrderGroup=”5″ PromoCodeRecordsPerOrderForm=”10″ PromoCodesPerOrderForm=”10″ LineItemsPerOrderForm=”40″ OrderTemplatesPerUser=”10″ PaymentsPerOrderForm=”10″ ShipmentsPerOrderForm=”40″ BasketsPerUser=”15″ OrderAddressesPerOrderGroup=”10″/]
[MappingFiles PipelineMappingFilename=”OrderPipelineMappings.xml” StorageMappingFilename=”OrderObjectMappings.xml”/]
[SerializationBindings]
[SerializationBinding OldType=”Microsoft.CommerceServer.Runtime.Orders.LineItem , Microsoft.CommerceServer.Runtime ,Version=6.0.1.0,Culture=neutral, PublicKeyToken=31bf3856ad364e35″ NewType=”Microsoft.CommerceServer.Runtime.Orders.LineItem, Microsoft.CommerceServer.Runtime,Version=6.0.1.0,Culture=neutral, PublicKeyToken=31bf3856ad364e35″/]
[/SerializationBindings]
[/orders]
[commerceEvent]
[add className=”Microsoft.CommerceServer.Runtime.AddItemToBasketEvent” ID =”AddItemToBasket”/]
[add className=”Microsoft.CommerceServer.Runtime.RemoveItemFromBasketEvent” ID =”RemoveItemFromBasket”/]
[add className=”Microsoft.CommerceServer.Runtime.SubmitOrderEvent” ID =”SubmitOrder” loggingEnabled=”صحيح”/]
[/commerceEvent]
[/CommerceServer]
Step 3: Adding “CommerceApplication” في “httpModules” Section
§ Copy the Commerce HTTP Modules to the end of the [httpModules] section.
[add name=”CommerceApplication” type=”Microsoft.CommerceServer.Runtime.CommerceApplicationModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceAuthentication” type=”Microsoft.CommerceServer.Runtime.CommerceAuthenticationModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceOrder” type=”Microsoft.CommerceServer.Runtime.Orders.CommerceOrderModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceCatalog” type=”Microsoft.CommerceServer.Runtime.Catalog.CommerceCatalogModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceProfile” type=”Microsoft.CommerceServer.Runtime.Profiles.CommerceProfileModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceExpressionEvaluator” type=”Microsoft.CommerceServer.Runtime.Targeting.CommerceExpressionModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceCache” type=”Microsoft.CommerceServer.Runtime.Caching.CommerceCacheModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]
[add name=”CommerceContentSelection” type=”Microsoft.CommerceServer.Runtime.Targeting.CommerceContentSelectionModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/][add name=”CommerceDataWarehouseAuthenticationModule” type=”Microsoft.CommerceServer.Runtime.CommerceDataWarehouseAuthenticationModule, Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″/]Remove or comment out the Commerce Server Authentication Module. This module is not required because ASP.NET Forms Authentication will be used for all authentications.
Step 4: Adding “خادم التجارة” AssembliesCopy the commerce server assembly information from CSharpSite web.config and paste it in the [assemblies] tag in the Central Administration site’s web.config as below:
[assemblies]
[add assembly=”Microsoft.CommerceServer.Runtime, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31bf3856ad364e35″ /]
[add assembly=”Microsoft.CommerceServer.Catalog, Version=6.0.1.0, الثقافة = محايدة, PublicKeyToken=31BF3856AD364E35″ /][/assemblies]

Step 5: Configure Central Administration to recognize Commerce Server Membership
Copy the below code snippet to [system.web] section of the Web.config file for the Central Administration. لاحظ: Paste it before the closing [/system.web].
[membership defaultProvider=”UpmMembershipProvider”]
[providers]
[clear /]
[add applicationName=”CSharpSite ”
enablePasswordRetrieval=”زائف”
enablePasswordReset=”صحيح”
requiresQuestionAndAnswer=”صحيح”
requiresUniqueEmail=”صحيح”
enableCreateDate=”صحيح”
enableEmailAddress=”صحيح”
enableLastLoginDate=”صحيح”
profileDefinition=”UserObject”
passwordFormat=”Hashed”
name=”UpmMembershipProvider”
type=”Microsoft.CommerceServer.Runtime.Profiles.UpmMembershipProvider”/]
[/providers]
[/membership]

Step 6: Configuring the Commerce Server Profiles section

This section contains settings which configure the functionality of profiles and catalog sets. و [userProfile] node resides in the [CommerceServer][profiles] node in the web.config.
Uncomment the profiles section in [commerceserver] node.

[userProfile
profileDefinition=”UserObject”
userIdProperty=”GeneralInfo.email_address”
organizationIdProperty=”AccountInfo.org_id”
catalogSetIdProperty=”AccountInfo.user_catalog_set”
userIdSource = “ASP.NET”
userIdKey = “GeneralInfo.email_address”
userIdTarget = “GeneralInfo.user_id”
/]
[organizationProfile
profileDefintion=”Organization”
organizationIdProperty=”GeneralInfo.org_id”
catalogSetIdProperty=”GeneralInfo.org_catalog_set”
/]

Step 7: Adding Users in the Central AdministrationLocate Central Administration, تطبيق إدارة, Authentication Providers, Default zone entry. Make sure that you have the PortalSite Web Application selected in the drop-down list.

o Click Forms.

o Change the Membership Provider Name to UpmMembershipProvider. This should match the name that is in the membership section of the Web.config file.Locate Central Administration, تطبيق إدارة, and Policy for Web Application. Make sure that you have selected the Portal Web Application.

o Click Add Users.

o Select Default zone, and then click Next.

o Type the e-mail address of the user that you added previously by using the Commerce Server Customer and Orders Manager, and then click Check User.

o If the user name is successfully recognized, it will be underlined. Select Full control, and then select Finish.

o If the user name is not recognized, run a SQL Server trace on the Commerce Server Profiles database to make sure that the queries are running against the database. Additionally, make sure that the entry for the provider is in the Web.config file for Central Administration, and look for errors in the event log.

Step 8: Copy the following XML files from the CSharpSite (IIS Virtual Directory) to the root folder of the Central Administration site:

o OrderObjectMappings.xml
o OrderPipelineMappings.xml

Run Central Administration to make sure that these changes were made correctly. If errors occur, check the Web.config file for syntax issues.Even if the page displays correctly, check the event log. Some permissions errors may be hidden.

Configure the MOSS portal to use the Commerce Server Membership provider:
Step 1: Follow the above 6 steps to configure Portal site for Commerce Server.

Step 2: Comment out the existing [authentication], [identity], و [authorization] sections. This will disable the default Windows authentication and authorization.

Step 3: Copy the below configuration settings contents to the Web.config file for the Portal site. Paste this after the previous sections that you just commented out. This sets up the site for Forms Authentication and denies anonymous access.

[authentication mode=”أشكال”]
[forms loginUrl=”/_layouts/login.aspx” name=”.ASPXFORMSAUTH” /]
[/authentication]
[authorization]
[deny users=”?” /][/authorization] View the Portal site in a Web browser. You should be redirected to the logon page. Log on and use the user credentials that you added by using the Customer and Orders Manager.

Step 4: Copy the following XML files from the CSharpSite (IIS Virtual Directory) to the root folder of the Portal site:

o OrderObjectMappings.xml
o OrderPipelineMappings.xml

Step 5: Restart the IIS

Step 6: Run the Portal site and look for errors.

[لاحظ : I am not able to Post scripts tag in here replace all “[” & “]” with “<" & ">“

مجانا مايكروسوفت الصحافة E-كتب لعرض LINQ,ASP.Net,سيلفرلايت

وفيما يلي E-كتب يمكن تحميلها من Microsoft Press الموقع.

  • Introducing Microsoft LINQ
    by Paolo Pialorsi and Marco Russo
  • Introducing Microsoft ASP.NET AJAX
    by Dino Esposito
  • Introducing Microsoft Silverlight 1.0
    بواسطة لورنس موروني

    المتشعب://csna01.libredigital.com

    تسجيل الدخول إلى الموقع باستخدام جواز سفرك / هوتميل الهوية وتحميل الكتب الإلكترونية مجانا.

بيل غيتس آخر يوم آخر في مايكروسوفت

قدم بيل غيتس له رئيسية النهائي في CES(المستهلك الإلكترونية مشاهدة) في لاس مشاركة.

يمكنك العثور له رئيسية الكامل في مايكروسوفت CES

سير العمل الموافقة على المحتوى في MOSS 2007

في الطحالب 2007 سير عمل الموافقة متاح في الخروج من مربع نفسها. فقط نحن بحاجة إلى تكوين خطوات قليلة فقط بعد ذلك نحن مستعدون مع عملية الموافقة.

إذا تم تكوين سير العمل الموافقة على الوثيقة سوف تكون مرئية فقط لالمساهم وإلى الموافق.

خطوات لتكوين سير العمل الموافقة على المحتوى

Open the Document Library
Click Settings -&gt; Document Library Settings


In Document Library Settings under Permissions and Management Click Workflow Settings

Document Library Settings -&gt; [Permission and Management] Workflow Managements

في الطحالب 2007 it has some prebuilt workflow templates for the following workflows

  • Approval
  • Collect Feedback
  • Collect Signatures
  • Disposition Approval
  • Three State

Now Select the Approval Workflow and give the unique name for the workflow instance.
Select the Existing Task List Name or create new Task List for this approval workflow.
Select the Existing History or create new workflow history to maintain this workflow history.
Under Start options you can specify how this workflow can be started.

· Allow this workflow to be manually started by an authenticated user with Edit Items Permissions
· Start this workflow when an item is created
· Start this workflow when an item is changed

If you choose “start this workflow when an item is created” it will automatically starts workflow when new item is added to the document library.

If you choose “start this workflow when an item is changed” it will automatically restarts the workflow when the items in the document library is modified.

Under workflow task
If you choose Assign Task to “All Participant Simultaneously” It will create the task for all participants at the same time. The workflow will be completed only after the approval of all approvers.

If you choose Assign Task to “One Participant at a time” It will follow the sequence of activity first the workflow task will be created to the first user and once its approved then only it will move on to the next approver.

If it’s required you can set the due date for the workflow.
The workflow status also can be notified other than the participants of the workflow by giving the name on notify others column.

We are creating the workflow for Content Approval. So don’t forget the check the option “Update the approval status (use this workflow to control content approval)"

Now you successfully created approval workflow.

You have to enable the content approval in the document library then only it will restrict other users to access it.

When you enable content approval the document will be visible only to contributor/author and approver, it will not be visible to other users in document library.

Open Settings -&gt; Document Library Settings
Under General Settings -&gt; Versioning Settings
Require Content Approval for Submitted Items? Choose Yes
And Click OK to Save the Settings.

Now Open the Document Library and upload the Document

Now the document is uploaded the Document Library

If you login using some other user credential (not an approver/contributor). The document will be displayed in the document library.

If you feel this post helps you to create workflow for content approval. Please leave your valuable comments.