પ્રેમ માટે [તમારા સૌથી પ્રેમભર્યા વ્યક્તિ / ઉચ્ચતર ભરી છે], don’t change the ‘Title’ સાઇટ કૉલમ.

પર શેરપોઈન્ટ ચર્ચાઓ, someone occasionally asks about "changing the label of Title" or about "removing title from lists".

નીચે લીટી: તે નથી!

દુર્ભાગ્યે, વપરાશકર્તા ઇન્ટરફેસ બતાવ્યું છે કે સ્તંભ લેબલ એક માર્ગ બદલો પરવાનગી આપે છે:

છબી

Title is a column associated with the "Item" સામગ્રી પ્રકાર. અનેક, અનેક, ઘણા સીટી માતાનો આ સ્તંભ વાપરો અને તમે તેને અહીં બદલો, it ripples out everywhere. There’s a good chance that you didn’t intend for that to happen. You were probably thinking to yourself, "I have a custom lookup list and ‘Title’ માત્ર એક કૉલમ નામ તરીકે અર્થમાં બનાવવા નથી, so I’m going to change it to ‘Status Code’ and add a description column." But if you follow through on that thought and rename ‘Title’ to ‘Status Code’, દરેક યાદી શીર્ષક (દસ્તાવેજ લાઇબ્રેરીઓ સહિત) changes to "Status Code" અને તમે કદાચ થાય તે માટે ઇરાદો ન હતો.

આ વાસ્તવિક સમસ્યા આ એક રસ્તો ફેરફાર છે. The UI "knows" that "title" is a reserved word. તેથી, if you try and change "Status Code" back to "Title", તે તમને અટકાવશે અને હવે તમે કરેલા એક ખૂણામાં માં જાતે ચિત્રો દોર્યા using paint that never dries 🙂

જો તમે પહેલાથી જ બદલાઈ તો શું થાય છે? I haven’t seen the answer we all want, which is a simple and easy method to change the label back to ‘Title’. Right now, the best advice is to change it to something like "Doc/Item Title". That’s a generic enough label that may not be too jarring for your users.

હું સંશોધન વસ્તુઓ મારા માટે શું યાદી પર હોય છે, જે થોડા અન્ય વિચારો હોય છે:

  • સંપર્ક માઈક્રોસોફ્ટ.
  • ઓબ્જેક્ટ મોડલ સાથે કંઈક, કદાચ એ લક્ષણ સાથે જોડાણમાં.
  • ડેટાબેઝ પદ્ધતિની બહાર આકૃતિ છે અને જાતે જ એસક્યુએલ અપડેટ. (તમે છતાં આવું પહેલાં માઈક્રોસોફ્ટ સંપર્ક કરીશું; તે સંભવિત તમારા સપોર્ટ કરાર રદ્દ ગણવામાં આવ્યાં કરશે).

કોઈને પણ આ ઉકેલવા માટે કેવી રીતે જાણે છે તો, એક ટિપ્પણી પોસ્ટ કરો કૃપા કરીને.

અંતમાં બપોરે સુધારો, 11/15: હું એક શીર્ષક સ્તંભ નથી કે યાદી એક પ્રકાર બનાવવા માટે એક પદ્ધતિ વર્ણવે છે કે આ લિંક મળી: http://www.venkat.org/index.php/2007/09/03/how-to-remove-title-column-from-a-custom-list/

7 પર "વિચારોપ્રેમ માટે [તમારા સૌથી પ્રેમભર્યા વ્યક્તિ / ઉચ્ચતર ભરી છે], don’t change the ‘Title’ સાઇટ કૉલમ.

  1. જેફ
    I just read your post and was concerned. I just did this very thing earlier this week.
    હું તરત જ પ્રશ્ન માં યાદી ગયો અને નામ બદલી ક્ષેત્ર કરવાનો પ્રયાસ કર્યો (હવે જોબ સંખ્યા કહેવાય) શીર્ષક માટે. It worked without any problems. Perhaps all of the patches, hot fixes and service packs since your original post have made this a non-issue. I’m on SP1 with all the latest updates.
    Just to be sure I named it back to Job Number and crated a new list. It had a Title column and everything looked fine.
    હું કંઈક ખૂટે છું તો મને જણાવો, or need to look at this a different way. I’d hate to let this go if it’s actually a problem. Now’s the time to fix it. I’m just getting ready to build out the content in my test environment.
  2. પીડી Galvin
    હું તમને કોઈ શીર્ષક સ્તંભ સાથે યાદી એક પ્રકાર બનાવવા માટે અનુસરી શકો છો કે જે એકદમ ટેકનિકલ પદ્ધતિ વર્ણવે છે કે આ લિંકને આખા આવ્યા:
  3. માર્ક મિલર EndUserSha rePoi ...
    પોલ,
    આવી, કે પૂર્ણ. શું એક વાસણ. તે શેરપોઈન્ટ સાથે કામ પ્રથમ દંપતિ અઠવાડિયા અંદર હતી. હું માત્ર સમસ્યા દૂર મેળવવા માટે સંપૂર્ણ સાઇટ કાઢવા માટે અંત. તે સામગ્રી ઘણો સાથે કદાચ લોકો માટે એક વિકલ્પ નથી, જો તમે ઉકેલ શોધી તો હું રસ હશો.
    સાદર,
    માર્ક
    EndUserSharePoint.com
  4. કોઈ નામ
    ખૂબ અંતમાં! ખૂબ અંતમાં! પરંતુ ઓછામાં ઓછા હવે હું પાછી ન જઇ શકો છો, તેથી હું પ્રયાસ કરી બંધ કરી શકો છો.
    તમે તે બદલી શકો છો કે જે અન્ય કોઇ વ્યકિતને ખોટું લાગે, પરંતુ તે પાછા બદલી નથી, અથવા હું મારા જૂના વર્ષની માત્ર ખૂબ picky છું?
  5. રિક Smit
    તમે વસ્તુઓ આ પ્રકારના શીર્ષક સ્તંભ માંગતા નથી, તો, તમે તે માટે સામગ્રી પ્રકાર બનાવવા જોઈએ. Then you have the option to "hide" શીર્ષક સ્તંભ. તેથી શીર્ષક સ્તંભ પછી હજુ પણ જીવંત છે, પરંતુ માત્ર vissible નથી. હું પણ કૉલમ કાઢી નાખવા માટે સક્ષમ હોવા માટે વિકલ્પ હોય છે ગમશે, પરંતુ તે શેરપોઈન્ટ દ્વારા આંતરિક ઉપયોગ થાય છે, જે કંઈક છે. So it’s one of those "features" અમે સાથે રહેવા માટે જરૂર છે! 🙂
  6. Kriss
    I believe the protection of "Title" આ UI એ સ્તર રહેવા જોઈએ. અને, તે ઓબ્જેક્ટ મોડલ મારફતે એકદમ સરળતાથી થવું જોઈએ કે.
    તમે નીચેની PowerShell સ્ક્રિપ્ટ પ્રયાસ કરી શકો છો:
    [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
    $સાઇટ =[Microsoft.Sharepoint.SPSite](http://localhost)
    $વેબ = $ site.openweb()
    $web.contenttypes[1].ક્ષેત્રો[1].title="Title"
    $web.contenttypes[1].અપડેટ()

એક જવાબ છોડો Kriss જવાબ રદ કરો

તમારું ઇમેઇલ સરનામું પ્રકાશિત કરવામાં આવશે નહીં. જરૂરી ક્ષેત્રો ચિહ્નિત થયેલ છે *